
Hydraulic Control System Failures Eliminated
Fine filtration removed particles, oil degradation and water from the hydraulic oil, restoring reliable operation.
Case study written by Andreas Man, Karberg & Henneman, Germany
Application Snapshot

Industry:
Marine

Country:
Germany

Oil type:
Hydraulic oil (Mobilgard 300)
Executive summary
Problems were identified in the hydraulic control system of the main engine, and oil analysis showed high contamination with water and particles in the hydraulic oil.
After installation of a CJC® Fine Filter on the hydraulic system, particles, oil degradation and water were removed from the oil and no further failures were reported. Identical oil filters were subsequently installed on the other seven ships of the same class.

Eliminated system failures
Since installation, there have been no failures in the hydraulic control system.

ME-hydraulic system requirements met
The requirements of the ME-hydraulic system are now met.

Improved oil condition
Particles, oil degradation and water removed from the hydraulic oil.
Proven across the fleet
Identical oil filters installed on the other seven ships of this class.

Hydraulic oil cleanliness improved with fine filtration
After installation of the CJC® Fine Filter, oil condition improved significantly. Particle contamination was reduced from ISO 22/19/16 at start-up to ISO 14/11/7 after five months, while water content decreased from 1,300 ppm to 851 ppm.
Measurable results and operational impact
The installation of the CJC® Fine Filter removed particles, oil degradation and water from the hydraulic oil and ensured that the requirements of the ME-hydraulic system were met. The convincing results prompted Hapag-Lloyd to install identical filters on the other seven ships of this class, confirming the effectiveness of the solution.
“Nothing but the installation of the CJC® Fine Filters enabled us to meet the requirements of the ME-hydraulic system.”
– Lars Voß, Technical Inspector of the shipping company

Let our experts help you
Get a tailored assessment of your oil condition
and keep your equipment running reliably